This time I designed up a holder for my Microtouch Focus Controller.   This was the First Draft of the holder.   The second draft has better corner support and slots to allow a strap to be used to secure the controller in place.   While I designed it for a snug fit I image as it heats and cools it could come loose.   I’ll attach a rendering of the new version shortly.    my 3D printer is having it’s extrusion head cleaned up and tuned up so I’m not printing at the moment.    BTW:  it took 14 hours to print this one.

For the curious,  the white PCV tube is my home made Daytime alignment tube.  Pin hole plate in front and a white Plexiglas in back to project the sun.   Made it really quick since I had to re-align the mount coarsely after removing it from the pier